Tabla De Contenido - Kopp GCM 620 Manual Del Propietário

SAFETY RULES
Warning
• This Meter has been designed with your safety in mind. Ho-
wever, no design can completely protect against incorrect
use. Electrical circuits can be dangerous and/or lethal when
lack of caution or poor safety practices are used.
• Read the Manual
Read this Instruction Manual carefully and completely. Vol-
tages and currents within the capability of this test equip-
ment can be hazardous. Follow the instructions in this
manual for every measurement. Read and understand the
general instructions before attempting to use this meter. Do
not exceed the limits of the meter.
Measurement Limits
AC Amperes:
DC Amperes:
AC Voltage:
DC Voltage:
Frequency:
Resistance:
Continuity Check:
TABLE OF CONTENTS
Page 12 SAFETY RULES
Page 13 INTRODUCTION
Page 13 PRODUCT FEATURES
Page 13 Auto Ranging
Page 13 Continuity Beeper
Page 13 Peak Hold Mode
Page 14 Low Battery Detector
Page 14 Controls and Feature Identifi cation
Page 17 PREPARATION FOR USE
Page 17 Before using the Meter
Page 17 When Meter is Used
Page 17 Visual Inspection of the Meter
Page 17 Visual Inspection of the Test Leads
Page 17 Battery Test
Page 17 Battery Replacement
Page 18 GENERAL OPERATION
Page 18 SPECIFICATIONS
Page 18 Electrical Specifi cations
Page 20 Physical Specifi cations
True RMS 0.3A to 1000A
0.3A to 1000A
True RMS 10mV to 600V
10mV to 600V
1Hz to 10 MHz
0.1ž to 40Mž
Beeps at approximately <15 ohms in the
40MHz ohms range.
12