Measurement Activation - HT APP Manual De Instrucciones

HT Laser Meter APP

4.2. Measurement activation

With iDM70 and mobile device correctly connected via
Bluetooth, the HT Laser Meter APP software displays
the message "Connected" and the symbol in the
upper left corner is highlighted. In these conditions,
distance measurement can be activated both by
pressing the button on the instrument and by
touching the symbol on the software. The
measured value is contemporarily shown on the
instrument's display and on the mobile device (see
Fig. 5).
Fig. 5: Connection and distance measurement
In measuring mode "Image caught in real time", if the
image found on the device is the same as the desired
scenario and the measured value is correct, press the
button and select "Use" to enter the printing
interface (see Fig. 6).
Fig. 6: Saving and using the image
EN – 6