Mx Onda MX-HC2193 Manual De Instrucciones página 29

• Make sure the outlet where the device is connected is easily
accessible. To disconnect the oven from the mains pull the
plug from the socket. you do never pull on the cable.
• Do not use not recommended by the manufacturer utensils.
• Do not place the oven above kitchens, or microwave ovens.
• Use extreme caution when handling trays, racks or containers,
when they are still hot.
• DO NOT cover the heating rods with aluminum foil, this would
increase the heat build and modify cooking times.
• Use specific containers for ovens; metal, tempered glass, clay,
etc. NEVER use plastic containers, paper, cardboard, etc.
• The outer surface of the furnace becomes high temperatures,
therefore, to avoid burns do not touch these surfaces when the
oven is in operation and no objects plastic, cardboard or
flammable near the oven.
• When the oven door is open Do not lean on it and do not place
objects on it.
• In case of failure, anomalies, if the oven has fallen, yes
tempered glass door is damaged, the plug, the cord or other
parts show deterioration unplug the appliance and do not
attempt to repair it yourself. Contact our Customer Service
nearest MX ONDA.
INSTALLATION
1. Place the oven on a stable, level surface, away from hot areas with high
humidity or near flammable materials (oil, curtains, cloths, etc.).
2. To ensure proper ventilation, leave at least 10 cm apart on each side of the
oven and 30 cm at the top. DO NOT obstruct the ventilation slots.
3. Fully unroll the cord and plug the appliance plug into the mains.
5