HALFEN BODY
Type overview
Body anchor type BA
(Support anchor)
The anchor has a sturdy body. Horizontal adjustment is
by turning the spade bolt in or out, the vertical position is
adjusted and secured with a serrated plate, laterally adjust-
ment by swivelling the element to a maximum of 15°.
Body anchor type DT
(Support anchor)
Important:
The locking bolt to secure the spade bolt has
to be tightened with a minimum torque of 5 Nm!
Product advantages
b
max 15°
r
r
max. r = 20 mm
2
Body anchor type DH
(only restraint anchor)
A lock-nut is included.
The lock-nut must be securely tightened against the base
element.
• A serrated plate or wedge plate for anchor vertical adjustment
• A spade bolt for horizontal anchor adjustment
• Anchors can be installed up to a maximum of 15°
• TÜV/LGA quality tested
© 2019 HALFEN · INST_BODY 02/19 · www.halfen.com
Assembly Instructions
71712
www.lga.info