Explanation Of The Brewing Cycles; Programming Cup Quantities - K-FEE Teekanne Tea Lounge System Instrucciones De Uso

eXplanaTiOn OF
GB
The BreWing
cycles
The duration and
Black tea
intervals of the
water flow are dif-
ferent for the different types
of tea, so that each tea is
brewed just right. Select the
button colour that match- Green tea
es the capsule (e.g. green
capsule → green button for
green tea). Chai Latte is
made with two capsules
without a break.
Herbal/fruit tea
The selected but-
ton flashes during
the preparation
of your tea. Please do not
remove your glass until all
Chai latte
buttons light up again.
Rinse the appli-
1
ance with water
after each use.
Risk of scald-
ing! Very hot
water.
Place appliance under the
outlet.
10
capsule is filled with brewing time: tea is ready to drink.
hot water allow to stand for
30 s
capsule is filled with brewing time: tea is ready to drink.
hot water allow to stand for
30 s
1st interval allow to stand second interval allow to stand tea is ready to
for 10 s for 10 s drink
1. milk 2. Chai
2 3 4
3 s min.
Press hot water button. Pour out rinsing water.
1
Tea
Setting range 120-300 ml
Factory setting 210 ml
4
Chai
latte
Setting range 70 -130 ml
Factory setting 105 ml
For tea, programming changes the filling
quantity of the last brewing interval, but
not the brewing time(s). The new filling
Off
quantities are saved (even after a power interrup-
tion). It is possible to reset the cup quantities to the
factory settings. For this, please read the Frequently
Asked Questions on page 19.
2 3
3 s min.
e.g. black tea
5 6
When the glass is full,
Tea is being prepared. press the button briefly.
The hot water button cannot be
programmed and works as follows:
• Press hot water button 1 x briefly:
50 ml hot water
• Press hot water button longer:
max. 200 ml hot water
prOgramming
GB
cup QuanTiTies
(adjusting quantities to
the cup size)
Risk of
scalding!
Very hot tea.
11