Bosch PowerPack 400 Manual Del Propietário página 76

To switch between the indication functions, press the "i"
button 1 on the on-board computer or the "i" button 11 on
the operating unit until the desired function is displayed.
To reset "Trip distance", "Trip time" and "Avg. speed",
switch to any of the three functions and then press and hold
the "RESET" button 6 until the indicator is set to zero. This
also resets the values for the other two functions.
To reset the "Max. speed", switch to this function and then
press and hold the "RESET" button 6 until the indicator is
set to zero.
To reset "Range", switch to this function and then press
the "RESET" 6 button until the display is reset to the value
of the factory setting.
When the on-board computer is removed from the holder
4, all function values remain stored and can be viewed.
Displaying/Adapting Basic Settings
The basic settings can be displayed and changed regard-
less of whether the on-board computer is inserted in the
holder 4 or not. Some settings are visible and changeable
only when the operating computer is inserted. Some menu
items may be missing depending on the equipment of your
eBike.
To access the basic settings menu, press and hold the
"RESET" button 6 and the "i" button 1 until "Configura-
tion" is displayed in text indicator d.
To switch between the basic settings, press the "i" but-
ton 1 on the on-board computer until the desired basic set-
ting is displayed. When the on-board computer is inserted
in holder 4, you can also press the "i" button 11 on the op-
erating unit.
To change the basic settings, press the On/Off button 5
next to the "–" indicator to decrease the value or scroll
down, or the light button 2 next to the "+" indicator to in-
crease the value or scroll up.
When the on-board computer is inserted in holder 4, you
can also change the values with the "–" button 12 or the
"+" button 13 on the operating unit.
To exit the function and store a changed setting, press the
"RESET" button 6 for 3 s.
The following basic settings are available:
– "– Clock +": The current time can be set here. Pressing
and holding the setting buttons fast-forwards the setting
speed.
– "– Wheel circum. +": You can change this value pre-set
by the manufacturer by ±5 %. This menu item is dis-
played only when the on-board computer is in the
holder.
Bosch eBike Systems
– "– English +": You can change the language of the text
indications. You can choose between German, English,
French, Spanish, Italian, Portuguese, Swedish, Dutch
and Danish.
– "– Unit km/mi +": The speed and distance can be dis-
played either in kilometers or miles.
– "– Time format +": The time can be displayed either in
a 12-hour or 24-hour format.
– "– Shift recom. on/off +": You can switch the indica-
tion of a shift recommendation on and off.
– "Power-on hours": Indicates the total travel time with
the eBike (can not be changed).
– "Gear calibration" (only NuVinci H|Sync): Here you
can calibrate the continuously variable transmission.
Confirm the calibration by pressing the "Bike lights" but-
ton. Then follow the instructions.
In the event of an error, it can also be necessary to per-
form calibration when riding. In this case, you also con-
firm the calibration by pressing the "Bike lights" button
and then follow the instructions on the display.
This menu item is displayed only when the on-board
computer is in the holder.
– "– Start gear +": The starting gear can be set here. The
automatic shift-back function is switched off in the "––"
position. This menu item is displayed only in connection
with SRAM DD3 Pulse and Shimano Di2. This menu item
is displayed only when the on-board computer is in the
holder.
– "Gear adjustment": This menu item can be used to per-
form fine adjustment of the Shimano Di2. The pre-de-
fined adjustment range can be found in the operating in-
structions provided by the drivetrain manufacturer.
Perform fine adjustment as soon as you hear unusual
sounds coming from the drivetrain.This will prevent pre-
mature wear of the drivetrain and also avoid any deteri-
oration in shifting behavior which could cause you to fall
in adverse situations. This menu item is displayed only
in conjunction with Shimano Di2. This menu item is dis-
played only when the on-board computer is in the
holder.
– "Displ. vx.x.x.x": This is the software version of the dis-
play.
– "DU vx.x.x.x": This is the software version of the drive
unit.This menu item is displayed only when the on-board
computer is in the holder.
– "DU # xxxxxxxxx": This is the serial number of the drive
unit. This menu item is displayed only when the on-
board computer is in the holder.
75
English–10
1 270 U20 XBI | (20.4.16)