Maintenance and cleaning
Defrost
Important:
Do not use knives or metal objects to defrost
To defrost partially the freezer compartment, you can remove the frost with a scraper
appliance).
If the frost thickness is more than 10mm, you need to do a fully defrost. Please follow the below process to do it:
1. Remove all foods, ice cube tray and shelf of the freezer and freezer compartment( store them in other cold
place)
2. Turn the thermostat knob to OFF and leave the freezer door opened.
3. Clean and wipe out the melted frost with a cloth.
4. After defrosting, you knob the thermostat the origin position the turn.
Troubleshooting
PROBLEMS
The freezer does not operate
The freezer makes some unusual
noises
The doors cannot close correctly
VERIFICATION
The power supply cord is unplugged.
The thermostat knob is set to OFF position.
The household fuse or circuit breaker has
blown out.
Verify that the freezer is correctly leveled
The freezer body touches the wall
Gurgling noises are produced by the circulation of the refrigerant in the pipes and should
not be considered like a problem.
Verify that the freezer is correctly leveled
Food package are blocking the door
The gaskets are dirty
The shelve are out of position
16
(provided with the
SOLUTIONS
Plug on the cable
Modify the thermostat knob setting
Replace the fuse
Follow our advices to level your freezer
Respect the space requirement
Follow our advices to level your freezer
Remove the package of food and sort the
Food in the freezer
Clean your freezer totally
Replace correctly the shelve