NEC NP01SW Serie Manual De Instalación página 11

Operation button/indicator section


POWER ON/OFF button (long press to
①
turn OFF)
Turns the power of the projector or display
connected to the interface selector on and
off.
SETUP button (long press)
②
Saves the information of the image input
terminal connected to the interface selector
into the interface selector memory.
NOTE
• Follow the steps described as IMPOR-
TANT information on page
press the SETUP button at the first time
use or after changing the connected pro-
jector or display.
AUDIO MUTE button
③
Temporarily mutes the sound of the projector
or display connected to the interface selec-
tor. Press again to turn the sound back on.
AV MUTE button
④
Temporarily turns off the picture and sound
of the projector or display connected to the
interface selector. Press again to turn the
sound back on.
VOL. +/- buttons
⑤
Adjusts the volume of the projector or dis-
play connected to the interface selector.
MIC VOL. +/- buttons
⑥
Adjusts the volume of the microphone.
 
 
HDMI1 button
⑦
Switches the input to the HDMI1 input termi-
nal. The indicator blinks on and off while HD-
BaseT link is processing, and then turns on
when the link process is properly finished.
HDMI2 button
⑧
Switches the input to the HDMI2 input termi-
nal. The indicator blinks on and off while HD-
BaseT link is processing, and then turns on
when the link process is properly finished.
HDMI3/MHL button
⑨
Switches the input to the HDMI3/MHL in-
ENG-3 and
put terminal. The indicator blinks on and off
while HDBaseT link is processing, and then
turns on when the link process is properly
finished.
MIC button
⑩
Switches the sound either from the HDMI or
the microphone.
When the sound of the microphone is se-
lected, the indicator turns on.
MIC SELECT button
⑪
Switches the type of microphone connected
(condenser microphone or dynamic micro-
phone).
When the condenser microphone type is se-
lected, the indicator turns on.
⑫
Remote sensor
(Not available when the receiver box is con-
nected.)
Receives the infrared signal from the remote
control.
ENG-9
 
 

