Arcam PA720 Manual De Instrucciones página 22

PA240
All specification values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specifications are subject to change without notice.
E&OE.
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 20 00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 20
Continuous power output at 0.2% THD per channel
Two channels driven, 4Ω / 8Ω, 1kHz 380W / 225W
One channel driven, 790W
8Ω bridged mode, 1kHz
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
Input sensitivity 200W / 8Ω
Signal/Noise ratio (A-wtd) 10W / 8Ω
Input impedance
Frequency response
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Maximum power consumption 1.5kW
Low power standby consumption 0.5W
Network standby consumption 2W
Dimensions W x H x D (including feet, 433 x 425 x 177mm
control knob and speaker terminals)
Weight (net) 18kg
Weight (gross) 19.7kg
EN-20
RCA Type XLR Type
31dB 25dB 31dB 25dB
1.15V RMS 2.3V RMS 2.3V RMS 4.6V RMS
110dB 114dB 110dB 114dB
10kΩ
20 - 20kHz +/-0.05dB
29/01/2020 13:11:37 29/01/2020 13:11:37