Rear Panel Connections and Controls PA720
BALANCED XLR AUDIO INPUTS
Connect the XLR outputs of your pre-
See "Connecting Sources and
Loudspeakers" on page EN-13.
IN7
IN6
IN5
OUT7
OUT6
OUT5
PRE-AMPLIFIER INPUTS
Connect the phono outputs of your
pre-amplifier.
See "Connecting Sources and
Loudspeakers" on page EN-13.
PRE-AMPLIFIER OUTPUT
OUT1-OUT7 provide a copy of
the signal applied to the IN1-IN7
phono sockets only, not the XLR.
Note: This is a passive output,
no additional filtering or
amplification is applied.
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 7
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 7
INPUT SWITCHES
Allow the PA720 to be configured to
amplifier.
different input types
See "Connecting Sources and
Loudspeakers" on page EN-13.
IN7
IN6
IN4
IN3
IN2
IN1
OUT4
OUT3
OUT2
OUT1
CH7
CH6
CH5
CH4
CLASS 2 WIRING
SPEAKER TERMINALS
RS232
See "Connecting Sources
This connection allows for remote control
and Loudspeakers" on
from a third-party home automation
page EN-13.
system or computer.
See "Network and RS232" on page EN-10.
USB
For software upgrades only.
See "USB" on page EN-10.
IN5
IN4
IN3
IN2
CH3
CH2
CH1
4-16 OHMS
NETWORK
This connection allows for remote control
from a third-party home automation system or
computer.
See "Network and RS232" on page EN-10.
EN-7
TRIGGER IN / OUT
Trigger IN allows the PA720 to be turned on or off by an external source.
Trigger OUT allows the PA720 to control the power state of other connected
equipment
See "Trigger IN/OUT" on page EN-10.
IN1
INPUT
RS232
NET
RCA
XLR
POWER INLET
110-120V/220-240V~
50/60Hz 1.5kW MAX
POWER INLET
Connect the correct mains cable
here.
Please read the sections "Placing The Unit",
"Power" and "Interconnect Cables" on page
EN-6
before
amplifier!
EN
TRIGGER IN
USB
5V
100mA
TRIGGER OUT
(12V
100mA)
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V ~
230 = 220 - 240V ~
VOLTAGE SELECT
Ensure that the voltage
selected matches the local
power supply.
connecting
your
PA720
29/01/2020 13:11:32
29/01/2020 13:11:32