Quick Start Guide; Getting To Know The Xtc-270; Battery - Midland XTC 270 Manual De Instrucciones

Quick Start Guide

N.B. Format the micro SD memory card before the first usage directly from the camera following the indication in related
paragraph.
1. Open battery door and install the battery pack. Replace battery cover.
2. Open and fold down back rubber cover. Insert micro SD card observing proper direction.
3. Choose the desired quality definition (SD: HD Ready; HD: FULL HD). Close the cover.
4. Move RECORD switch forward, recording will start in 4 seconds.
5. To stop recording, slide switch back to the off position.
6. Plug in camera to computer and download video.

Getting to Know the XTC-270

Battery

1. To insert the battery pack, push down the battery door latch on the right side of
the camera. Door will release. Push forward to remove.
2. Install the Lithium battery pack.
3. Return battery door and click into place.
Battery Status Indicator
Solid Green
Solid Red
Blinking Red*
No Light
Note: When the red battery LED begins blinking, be prepared to charge the battery because the camera will stop recording at this
point.
Meaning
Indicates full battery life
Indicates half battery life
Indicates low battery life
Batteries are dead
13