Display and LED Displays
3B LASER PEN
V2.0a
3B LASER PEN
808nm 200mW
200mW
240.0J
A
CW
120.0J
100mW
CW
M
120.0J
100mW
M
CW
120.0J
100mW
CW
M
100mW
120.0J
M
CW
20:00
100mW
M
CW
M
63 LW
A
00 LW
100mW
19:43 - 1.7J
M
22
This screen appears during the booting process after the laser unit has been tur-
ned on. The first line shows the specific model, and the second line the software
status of the unit.
This screen appears after the laser unit has been turned on once the booting
process is finished. The second line shows the wavelength and the maximum
CW output. The battery charge status is shown on every screen. The loudspeaker
icon indicates whether the sound is activated. If the sound is deactivated, the
loudspeaker icon is crossed out.
Initial setting. The settings which were used last and the current therapy
parameters (laser power, point search program, therapy program, energy dose
rate) and the battery charge status are displayed.
A value that appears highlighted can be changed with the + and - keys. On this
screen the laser power level can be altered. Pressing the SET key saves the
selected value. The parameters output, point search mode, therapy programs,
energy dose rate, and/or therapy time can be edited.
Setting the point search mode and starting the laser unit manually or
automatically.
Setting the therapy program.
Setting the energy dose rate.
Setting the therapy time.
In point search mode M, the conductance of the skin is indicated by a bar chart
and shown as a digital value (0–99).
This screen appears when the laser is activated. Laser power level, point search
program, as well as the remaining therapy time and the discharged energy dose
rate in J are shown.
This screen appears when the laser is activated. Laser power level, point search
program, as well as the remaining therapy time and the discharged energy dose
rate in J are shown.
Last revised 16.02.12