Programming of departures in case of electronic purse
The control of departures will be made from the selector. We act from the
bank of microswitch of the selector.
Accessing programming:
1. Set all switches to OFF.
2. Set switches 7 and 8 to ON.
3. We pass anyone of the options with asterisk (before any asterisk to carry
out these first two steps).
(*) lmpulse totalisator options.
1. Set switch n° 4 in ON.
2. Insert a coin until it is accepted.
3. Set switch n° 4 to OFF. Next enter the corresponding combination using
switches 1 to 4 described in this section corresponding to options
programming:
• 1 = OFF / ON promotion deactivated / activated.
• 2 = OFF Inhibición for high level. Always.
• 3 = OFF / ON Inventory deactivated / activated.
• 4 = OFF Totalitation of credits with real coin values.
• 5 = OFF / ON doesn't cancel remains of the credit / it cancels remains of
the credit.
• 6 = OFF / ON Bonification to the Credit / allowance to the currencies (if
allowance is active).
4. Reinsert a coin. Upon acceptance, the options will be saved
(*) Credit value (Credit impulses).
This value is valid only if "Totalitation of real coin values" has been
programmed.
1. Set switch n° I in ON.
2. Insert the amount equivalent to price you wish to program. The valid credit
will be that of the accepted coins.
3. When credit is rached, set switch n° I to OFF. The acceptance gate will be
activated once, indicated that the process has been completed
successfully.
(*) Credit of Bonus (value).
It is valid only if Totalización of credits has been programmed with real
values of currency. "When reaching the value Credit of Bonus for the
– 13 –
SAM
BILLARES
BILLIARDS