Appliance - deki BabyBalanz Manual De Usuario

For the correct operation of the BabyBalanZ you
must follow the following steps:
[Fig.3 / Page 7]
1. Lock the front wheels so they do not turn if your
buggy or stroller has this option.
2. Insert the platform into the opening in the

appliance.

3. Turn on the safety switch (red) located on the base
("I" position).
4. Standing in the front of the buggy, position the
BabyBalanZ on the wheel on your right. If in doubt,
follow the instructions in "Positioning the BabyBalanZ
according to the wheels of the buggy".
5. Open the fixing clamp until is wider than the wheel
of your buggy by turning the adjusting wheel.
6. Pull the buggy's wheel toward you in contact with
the platform's higher wall until it butts against the
clamp.
7. Put the fixing clamp in its initial position. It is
important that:
7.1. The clamp is facing the centre of the
buggy wheel.
7.2. The wheel must be in contact with the
back of the clamp.
8. In this position, turn the adjusting wheel until the
clamp is securely attached to the buggy's wheel.
9. Turn on the top On/Off switch (black) ("I" position).
Once you have finished using the Deki BabyBalanZ,
turn it off as follows:
1. Turn off the top On/Off switch (Position "0").
2. Unplug the appliance from the mains if it is working
connected to the mains.
3. Release the fixing clamp by turning the adjusting
wheel.
[Fig.4 / Page 8]
4. Remove the buggy from the platform.
5. Remove the platform.
6. Turn off the safety switch on the base ("0" position).
7. Store the appliance in a clean, dry and cool place.
17 EN