TROUBLESHOOTING
PROBLEM
The appliance does not turn on.
The appliance stops suddenly or
there is a power failure.
The LED lights do not show battery
status.
The clamp of the apparatus comes
off the wheel of the buggy or
stroller when it is operating.
You cannot resolve one or more of
the above problems.
EN
18
SOLUTION
Check that the two switches are on, including the safety
switch on the base (in the "I" position).
Check that the battery is sufficiently charged or that the
appliance is connected to a power source.
Check that the battery has not been fully discharged.
Turn the two switches off and on in the order indicated in
the section "Instructions for using the appliance".
Remember that the safety switch on the base must be ON
to find out the charge level of the battery.
Make sure you properly tighten the clamp using the wheel
provided for this purpose.
Contact your dealer.