Initial Use; Charging The Battery; Installation Location; Operation - Beurer ELLE FCE80 Instrucciones De Uso

Aparato de ultrasonidos
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
5.

Initial use

Unpacking the device
Warning!
Keep packaging material away from children!
There is a choking hazard.
> Open the cardboard packaging
> Remove the ultrasound device with transparent
cover, the charger and the cable with the power
supply unit
> Check all parts for damage

Installation location

Warning!
• Before using the device for the first time, read
the safety notes in the Safety chapter.
w Safety pages 13 to 14
• Ensure that the mains cable does not pose
a trip hazard.
> Insert the mains cable plug into the charger
> Place the charger on a smooth, level surface
> Plug the power supply unit into a mains socket
6.

Operation

Warning!
• Before using the device for the first time, read
the safety notes in the Safety chapter.
w Safety pages 13 to 14
caution!
• If you experience irritations of any kind, stop
treatment immediately.
• When using the ultrasound device for the first
time, or if you have sensitive skin, reduce the
treatment time.

charging the battery

Place the device in the charger
The red LED lights up; this means that the charging
process has begun and the battery is being
charged.
The entire charging process takes around 3 hours
for the first charge or whenever the device has
not been used for a relatively long time. When the
device has been in regular use, charging takes
around 2 hours.
The red LED goes out as soon as the charging
process has finished.
Important!
To ensure the long life of your battery, the device
should always be fully discharged before being
fully recharged (takes around 2 hours).
checking that the ultrasound is
working
Check that the ultrasound head is working.
> Carefully let a few drops of water drip onto the
ultrasound head
> Switch on the device using the On/Off switch
If the drops of water vibrate, the device is working.
Important!
• Clean your face thoroughly before treatment.
• Use only water-based gels and skincare
products. Oily skincare products do not
support the function of the ultrasound device.
• Check whether your skin tolerates the skincare
product/contact gel you are using.
16

Publicidad

Tabla de contenido
loading

Tabla de contenido