Rimax RB205 Manual De Instrucciones página 28

Note: The Feeding alert option is set to OFF [
picture (figure 6). The viewing camera Channel Nº is set to [
shown on the above (figure 6). If in the case Channel 1 does not appear,
press the
Channel 1, The BM0305 is set to the above factory default settings.
4. To turn off the monitor unit system, simply press the ON/OFF button for
approximately four seconds. To turn off the camera unit system, simply press
the ON/OFF button for approximately two seconds.
5. The monitor unit system should be placed at least 1m away from the camera
unit system. In the case the Monitor and the camera are too close to each other,
a "BeBe" sound will be heard. (The BM0305 is designed to perform normal
situations as the camera and Monitor should be placed in 2 different rooms).
[ ] located on the side of the display screen to select
1 meter/3 feet
Figure 7
OFF ] as shown on the above
28
] as