Connecting To Other Devices - Panasonic RR-US310 Instrucciones De Funcionamiento

Connecting to other devices

Recording from this unit to another device
(dubbing):
1 Connect as shown below.
Audio cable with resistor (not supplied)
Stereo mini plug
Stereo mini plug
Insert all
the way in.
Plug type:
ø 3.5 mm Stereo
mini plug
Record.
2
1 Start recording on the recording device.
2 On this unit, play the file you want to dub. ( ➜ page 12)
● Also read the operating Instructions for the device to
be connected.
● Select the connection cable to use in accordance with
whether the device to be connected is monaural or
stereo. If a wrong cable is used in combination with
the unit, recording may not be able to be performed
properly. For example, only 1 channel may be recorded.
● The sound quality after dubbing may differ from the
sound quality before dubbing.
28
● To record at a suitable volume, adjust the volume on this unit.
28
To audio input
microphone jack
Stereo
Stereo mini plug
jack
Monaural
jack
Monaural mini plug
Other devices
Recording from another device to this unit:
1 Connect as shown below.
To audio output
(headphone) jack
Audio cable without resistor (not supplied)
Stereo mini plug
Stereo
jack
Portable composite
device, etc.
Record.
2
1 Start recording on this unit. ( ➜ page 11)
2 Start playback on the external device.
● Also read the operating Instructions for the device to
be connected.
● If the sound source volume is too low or high, adjust
the microphone sensitivity. ( ➜ page 16)
Or, adjust the volume of the other device.
Stereo mini plug
Insert all
the way in.
Plug type:
ø 3.5 mm Stereo
mini plug