Specific Safety Rules - Makita BO5010 Manual De Instrucciones

ENGLISH
1 Abrasive disc
2 Skirt
3 Dust bag
4 Dust nozzle
SPECIFICATIONS
Model
Pad size .............................................................. 123 mm
-1
Orbits per minute (min
Dimensions (L x W x H) ...................150 x 123 x 145 mm
Net weight ............................................................. 1.2 kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to sander safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the
operator.
2. Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
3. Hold the tool firmly.
4. Do not leave the tool running. Operate the
tool only when hand-held.
5. This tool has not been waterproofed, so do
not use water on the workpiece surface.
6. Ventilate your work area adequately when
you perform sanding operations.
7. Some material contains chemicals which may
be toxic. Take caution to prevent working
dust inhalation and skin contact. Follow
material supplier safety data.
4
Explanation of general view
5 Groove
6 Front fixing cardboard
7 Front side of paper dust bag
8 Claws
) ...................................... 12,000
8. Use of this tool to sand some products,
paints and wood could expose user to dust
BO5010
containing
BO5011
appropriate respiratory protection.
9. Be sure that there are no cracks or breakage
on the pad before use. Cracks or breakage
may cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
OPERATING INSTRUCTIONS
Installing or removing abrasive disc (Fig. 1)
CAUTION:
Always be sure that the tool is switched off and
unplugged before installing or removing the abrasive
disc.
For BO5010
To install the abrasive disc, first remove all dirt or foreign
matter from the pad. Then attach the abrasive disc to the
pad, using the hook-and-loop system of the abrasive disc
and the pad. Be careful to align the holes in the abrasive
disc with those in the pad.
To remove the disc from the pad, just pull up from its edge.
CAUTION:
GEB021-1
Always use hook-and-loop system abrasive discs. Never
use pressure-sensitive abrasive discs.
For BO5011
To install the abrasive disc, first remove all dirt or foreign
matter from the pad. Then peel off the backing paper
from the abrasive disc and attach the abrasive disc to the
pad. Be careful to align the holes in the abrasive disc with
those in the pad.
CAUTION:
If you peel off the abrasive disc from the pad, its adhe-
sion will become poor. Never attempt to stick it onto the
pad for further use.
Installing dust bag (Fig. 2)
Install the dust bag on the tool so that the Makita logo on
the dust bag will be upright (not upside down). The dust
bag can be swiveled 360°. Position the skirt so that the
dust bag will not interfere with your work.
9 Upper part
10 Notch
11 Guide
12 Switch
hazardous substances. Use