Maintenance And Storage - senya SYBF-T022 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

-
Wholemeal bread and bread with an uneven surface requires a longer toasting time. Select a
higher thermostat setting.
-
If you only insert one slice of bread into the toaster, select a lower thermostat setting to
avoid over-toasting.
-
During continuous use at the same browning setting, the bread will be more thoroughly
toasted at the end of the toasting cycle than at the beginning.
-
If after use the bread has not been ejected from the appliance, pull the lever upwards to
eject the bread in order to facilitate removal.

4. Maintenance and storage

 Unplug the toaster and allow it to cool before cleaning.
 Wipe the external surfaces of the appliance using a slightly damp cloth and dry them using a
soft, dry cloth.
 Do not use abrasive cleaning agents to clean the appliance.
 To clean the internal surfaces, turn the appliance upside down and shake it over a bin until
all lodged crumbs have fallen out.
 The crumb tray must be cleaned regularly to avoid crumbs catching fire. Do not allow
breadcrumbs to accumulate in the bottom of the toaster:
1. Slide the crumb tray from its slot located on the side of the appliance.
2. Wipe it using a slightly damp cloth, then dry it using a soft, dry cloth. Never put the crumb
tray in the dishwasher.
3. Empty the crumb tray and slide it back into its slot before using the toaster again.
 When you are not using the appliance and after ensuring it has cooled after use, wind up the
cord into the cord compartment located underneath the appliance.
 Store the appliance in a cool, dry place.
 To clean the interior panel of the detachable window, follow these steps:
1. Hold the appliance in one hand and tilt it backwards slightly, with caution.
2. Using your other hand, press the locking/unlocking latch located underneath the appliance
and gently pull the glass panel outwards.
3. Clean the panel using a slightly damp cloth which has been soaked in washing-up liquid, then
dry it using a soft, dry cloth.
4. Slide the panel back into its slot until it clicks into place.
5. TREATMENT OF THE ELECTRIC AND ELECTRONIC APPLIANCES AT
THE END OF LIFE
Application in the countries belonged to the European Union and in other European
countries which have a selective collect system.
In accordance with applicable European Union regulations, we would remind you
that end-of-life electrical and electronic appliances must not be disposed of
among household waste. There are collection points for this purpose, where the
value of such appliances is enhanced and they are processed and recycled. By

Publicidad

Tabla de contenido
loading

Tabla de contenido