Auxiliary Input (Aux-In); Setup Options; Service And Maintenance - Festool SYSROCK BR 10 Manual De Instrucciones

GB
BR 10

5.10 Auxiliary input (AUX-IN)

A 3.5 mm Auxiliary input
[1-4] is provided on the
top panel of your SysRock to permit
an audio signal to be fed into the unit
from an external audio device such as
an MP3 or CD player.

Connect a stereo or mono audio
source (for example MP3 or CD
player) to the Auxiliary input [1-4].

Press the Source button [j] to se-
lect the Aux mode.

Adjust the Volume control on your
MP3 or CD player (max. 80%) to en-
sure an adequate signal and then
adjust the volume on the SysRock
for comfortable listening.

Never use the Aux-In socket in
rainy or moist conditions to pre-
vent moist from entering the
SysRock. Make sure that the
rubber cover on top fits thightly
when operating in a moist envi-
ronment.

5.11 Setup options

Attachment handle [1-1]
The folding attachment handle allows
you to hang the device from scaffold-
ing or similar structures.

If you decide to power the device
with an external Festool battery
pack, the attachment handle
22
must be detached beforehand
[2A].
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached
to the threaded tripod socket [2-1].
6

Service and maintenance

Customer service and re-
pair only by manufacturer
or
Find your nearest address
online
tool.com/service
EKAT
Always use original Fes-
4
tool spare parts! Order no.
5
3
2
1
at: www.festool.com/ser-
vice
– Always clean the display [1-8]
and speaker grill [1-6] on the
SysRock using a soft, dry cloth to
prevent any damage. Do not use
solvents.
– Keep the contacts on the SysRock
and battery pack clean.
7 Environment
Do not dispose of the de-
vice in household waste!
Recycle devices, accesso-
ries and packaging. Ob-
serve applicable national regula-
tions.
service workshops:
at www.fes-