Symbols; Safety Warnings - Festool EHL 65 EQ Manual De Instrucciones Original

English
Contents
1 Symbols..................................................... 12
2 Safety warnings.........................................12
3 Intended use..............................................13
4 Technical data........................................... 13
5 Machine features...................................... 13
6 Commissioning..........................................13
7 Settings......................................................14
8 Working with the machine........................ 15
9 Service and maintenance..........................15
10 Accessories............................................... 15
11 Environment.............................................. 16
1

Symbols

Warning of general danger
Read the operating manual and safety
instructions.
Warning of electric shock
Wear ear protection.
Wear protective goggles.
Wear a dust mask.
Wear protective gloves.
Pull out the mains plug
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
12
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Machine-specific safety notices
- Wait for the cutter to stop before setting
the tool down. An exposed rotating cutter
may engage the surface leading to possible
loss of control and serious injury.
Hold the power tool by insulated gripping
-
surfaces, because the cutter may contact
its own cord. Cutting a "live" wire may
make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by your
hand or against the body leaves it unstable
and may lead to loss of control.
Festool electric power tools must only be
-
installed on work tables provided by
Festool for this purpose. If the tool is in­
stalled in another, or self-made, work ta­
ble, it can become unstable and result in
serious accidents.
- Check the installation fixture prior to use
and do not use the machine if the fixture
does not function correctly.
-
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.
- Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.