Rustic Planer Heads (Accessories) - Festool HL 850 E Manual De Instrucciones Original

7.1 Rebating
The planer can rebate to an unlimited depth.
To do this, fold away the protective cover [2-5]
by fi rst pushing the lever [1-5] forward and then
laterally to the left. The front of the planer head
is now exposed.
When work is completed, the protective cover
moves back automatically to initial position
through spring force.
7.2 Chamfering
The front planer platen is equipped with a 90° V
groove [2-12] to allow the chamfering of work-
piece edges. This V groove is 2 mm deep, thus
producing a 2 mm edge chamfer with the chip
thickness setting 0.
7.3

Rustic planer heads (accessories)

The planer can also be used to create rustic sur-
faces. Three rustic planer heads are available for
this purpose:
- HK 82 RG: creates a surface with a coarse struc-
ture.
- HK 82 RG: creates a surface with a fi ne struc-
ture.
- HK 82 RW: creates an uneven, wavy surface.
The blades on the rustic planing head (HK
82 RF, HK 82 RG, HK 82 RW) protrude ap-
prox. 1.5 mm over the planer foot.
When using rustic planing heads on the planer,
set the cutting depth to 0 mm. Otherwise there is
a risk that the blades on the head will cut into the
planer foot and destroy the planer.
The cutting depth limiter [6-2] prevents the cut-
ting depth from increasing inadvertently while
planing work is performed.
Always attach the cutting depth limiter to the
planer before working with a rustic planing head:
- Set the cutting depth on the planer to 0 mm,
- Attach the cutting depth limiter by inserting the
rotary knob [6-1] through the limiter and into
the threaded hole [6-3].
8 Accessories, tools
For your own safety, use only original
Festool accessories and spare parts.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
"www.festool.com".
9 Maintenance and care
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at:: www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/Service
5
3
2
1
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation.
To clean the chip collection opening:
– Remove the adapter AD-HL (5-6) (if applicable).
– Empty the adapter AD-HL, remove any obstruc-
tions.
– Remove any chips jammed into the chip collec-
tion opening, if necessary clean the machine
with a resin solvent.
– In case of extreme contamination, remove the
planer head (chapter 5.2) to clean the opening
leading to the chip ejection.
– Attach the dust extractor and vacuum the chip
ejection openings.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.
10 Environment
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh: www.festool.com/reach
14