Original Operating Manual; Safety Instructions - Festool CLEANTEX CTM 26 E Manual De Instrucciones Original

Original operating manual

1

Safety instructions

Warning! Read and observe all information and safety instructions.Ignoring warn-
ing notes and instructions may lead to electric shocks, fires and/or cause serious injury.
Keep all safety information and other instructions in a safe place for future reference.
– This machine can be operated by children over 8 years of age and persons with re-
duced physical, sensory or mental capabilities or a lack of practical experience and
knowledge, provided they are supervised or have been instructed to use the machine
safely and understand the dangers of machine operation. Children must not play with
the machine. Cleaning and user maintenance may not be performed by children with-
out supervision.
– Warning:machine may contain hazardous dust. Only authorised qualified specialists
with suitable protective equipment may perform maintenance, empty the container
and change the filter.
– Always operate with the filter system installed!
– Always use suitable protective equipment!
– If intact following a visual inspection, work in a dry environment according to instruc-
tions!
When extracting large quantities of oak or beech wood dust or dust that exceeds
the permitted limit values, only extract from a single machine (electric or air tool).
– Risk of explosion and fire hazard: do not extract sparks or hot dust, flammable or ex-
plosive dust (e.g. magnesium, aluminium, petrol, thinner, with the exception of wood),
aggressive fluids/solids (e.g. acid, leach, solvent).
– Observe all national safety regulations as well as the material manufacturer's speci-
fications!
– Always use the socket on the machine for the purpose specified!
– Check the plug and the cable regularly and should either become damaged, in order
to avoid a hazard, have them replaced by an authorised after-sales service workshop.
– Do not lift or transport using a crane hook or lifting gear!
– Only for AS/NZS: The tool shall always be supplied via residual current device with
a rated residual current of 30 mA or less.
2 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear a dust mask.
CTM
GB
13