Technical Data; Parts Of The Machine; Commissioning; Switching On/Off - Festool ISC 240 Li Manual De Instrucciones Original

English
The cordless insulating-material saw is not
suitable for sawing chipboard, metal, wood or
pressure-resistant insulating materials made
of natural fibres.
This power tool may only be used by experts or
instructed persons.
Only saw insulating materials with the cutting
set intended for this purpose, see section
The user is liable for improper or non-in­
tended use.
4

Technical data

ISC 240 Li cordless insulating-material saw
Motor voltage
Stroke rate
Stroke length
Max. cutting depth
Cutting set, short
Cutting set, long
Weight without battery pack
5

Parts of the machine

The illustrations specified are located at the be­
ginning and end of the operating instructions.
[1-1] Auxiliary handle
[1-2] Main handle
[1-3] Lint filter
[1-4] Buttons for releasing the battery pack
[1-5] On/off switch
[1-6] Rotary knob for changing the cutting
set
[1-7] Cutting set
[1-8] Protective cover
[1-9] Extractor connector
6

Commissioning

6.1 Changing the battery pack [2]
6.2

Switching on/off

The power tool features an on/off switch on
both sides. Use either switch to switch the pow­
er tool on or off.
Switching on
► Press the on/off switch [1-5] twice in quick
succession.
16
Switching off
► Press the on/off switch [1-5] once.
6.3

Selecting a cutting set

Two cutting sets, each available in two lengths,
6.3 .
are available for machining.
Cutting set with serrated saw blade (available
as an accessory depending on the model)
14.4–18 V
3000 rpm
26 mm
240 mm
350 mm
1.8 kg
Cutting set with cross-set saw blade
(accessory)
Insulating material
Flexible natural fibres
< 90 kg/m³
Flexible mineral wool
< 100 kg/m³
Pressure-resistant
wool
100–170 kg/m³
Only use cutting sets that have been ap­
proved by the manufacturer.
The cutting set with serrated
saw blade (SG-240/W-ISC,
SG-350/W-ISC) consists of a
guide rail with both a movable
and a fixed saw blade.
The cutting set with serrated saw
blade must be adjusted before initial
operation, see section
To ensure an optimum tool life for the
serrated saw blade, use a separate
cutting set for mineral wool and a
separate cutting set for natural fibres.
The saw blade is no longer suitable
for sawing natural fibres once it has
been used to saw mineral wool.
The cutting set with cross-set
saw blade (SG-240/G-ISC,
SG-350/G-ISC) consists of a
guide rail and a movable saw
blade.
mineral
7.3 .
Saw blade