Get Started - ION DOCUSCAN Manual Del Usuario

GET STARTED

POWER:
1. Connect scanner to power.
• AC adapter: Connect one end to the scanner's DC IN jack, and the other end to a power socket.
• Mini-USB cable: Connect the mini-USB connector to the scanner and the other two standard USB connectors to
your computer.
2. Press and hold the POWER button to turn the scanner on.
3. If the scanner is connected to your computer, a menu will appear. Use the UP/DOWN buttons to select "USB Power,"
then press the OK button.
4. Insert your SD or MMC card into the card slot with the gold contacts facing up.
SCANNING
1. Connect the scanner to a power source and inserting an SD/MMC card (as
described above).
2. Prepare your image for scanning:
• Paper: Place the paper into the FEED SLOT with the surface to be scanned
facing down. Adjust the PAPER GUIDE so it rests against the edge of the
paper.
• Photo: Place the photo inside the included protective photo sleeve. Place
the photo sleeve into the FEED SLOT with the sealed end first and with the
surface to be scanned facing down. Adjust the PAPER GUIDE so it is at the
edge of the sleeve.
3. Press the SCAN button. The photo or document will be pulled through the scanner.
Do not press any button when "Scanning..." is shown on the LCD. Wait until
scanning is completed.
Notes:
• By default the folder "\DCIM\100NVtim" will be created in the inserted memory card. All scanned images will be saved in
the "100NVTIM" folder. When the counter reaches 9999 it will be automatically generated another new folder in a
sequential order.
• When the memory card is full, a "Memory Full" warning will appear.
• When scanning images with a dark background, the scanner may not be able to detect the images or may crop the
images in an undesirable way.
Scan Settings:
1. Press the MENU button to enter the Playback Settings Menu.
2. Use the LEFT / RIGHT buttons to select "Playback" or "Setup."
3. Press the UP / DOWN buttons to select an option from the submenus. See the
table below for the available settings.
Note: Press the MENU button repeatedly to go to the next highest menu or to exit
the Playback Menu.
MENU SUBMENU
Color Mode
Scan
Color Optimum
Language
Format
Setup
Calibration
Factory Default
DESCRIPTION
Selects a scan mode: gray[scale] or color
Provides color optimization. (Scanning will take longer than usual with this
feature activated. If the scanner is turned off, the feature will reset to "off.")
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish.
Deletes all the data on the SD/MMC card.
Select "OK" to recalibrate the scanner. Please see the CALIBRATION section for
instructions.
Restores the playback settings to their defaults.
4