Sequential Trip - Max SuperFramer SN883RH2 Manual De Operaciones

SEQUENTIAL TRIP

The Sequential Trip requires the operator to hold the tool against the work before pulling the trigger. This
makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications.
The Sequential Trip allows exact fastener location without the possibility of driving a second fastener on
recoil, as described under "Contact Trip".
The Sequential Trip Tool has a positive safety advantage because it will not accidentally drive a fastener
if the tool is contacted against the work-or anything else-while the operator is holding the trigger pulled.
SEQUENTIAL TRIP
Identified by ORANGE TRIGGER.
SINGLE ACTUATION
CONTACT ACTUATION
WITH ANTI-DOUBLE
FIRE MECHANISM
SEQUENTIAL TRIP
1 Pulling the Trigger and keeping it
pulled.
2 Depressing the Contact Arm.
• The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
The tool fires a nail each time when
the Contact Arm is depressed.
The tool cannot fire a nail.
PROCEDURE
1 Depressing the Contact Arm.
2 Pulling the Trigger and keeping
it pulled.
• The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
• The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
• The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released and
the Contact Arm is left work sur-
face.
15