About the refrigerator doors.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
7/16" Wrench
Raise
10
Refrigerator Doors
The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.
When opening and closing the door you
will notice a stop position. If the door is
opened past this stop point, the door will
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
Door Alignment
If doors are uneven, adjust the refrigerator
door.
Using a 7/16" wrench, turn the door
adjusting screw to the right to raise the
door, to the left to lower it. (A nylon
plug, imbedded in the threads of the
pin, prevents the pin from turning
unless a wrench is used.)
The resistance you feel at the stop
position will be reduced as the door
is loaded with food.
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.