Technical Description - Warco SinePower MSI412 Instrucciones De Montaje

Technical description

5 Technical description
The inverters can be used anywhere where there is a 12 Vg g or 24 Vg
voltage source. The inverters are connected to:
 Vehicle socket: MSI212 (12 Vg), MSI224 (24 Vg)
 Vehicle battery: MSI412 (12 Vg), MSI424 (24 Vg)
Devices MSI412 and MSI424 can be switched on and off optionally using an
external switch.
The devices are additionally cooled with a load and temperature-dependent
fan (fig. 2 2, page 4).
The maximum constant output for the devices is as follows:
 For inverters MSI212 and MSI224 150 W
 For inverters MSI412 and MSI424 350 W
Never connect devices that have a higher power requirement.
I
NOTE
Note when connecting devices with an electrical drive (such as
power drills and refrigerators), that they often need more power
than is stated on the type plate.
If the system has a short circuit, the device switches off.
If the voltage is too high, the device switches off and must be restarted
manually.
If the input voltage is too high or too low or the system overheats, the device
switches off and then on again after a short while.
24
SinePower
EN