Water Inlet Lines; Water Supply And Drain Line Sizing/Connections; Water-Cooled Condenser Water Pressure - Koolaire K Serie Manual De Instalación, Operación Y Mantenimiento

Section 2

Water Supply and Drain Line Sizing/Connections

Water
Location
Temperature
35°F (2°C)
Ice Making
Water Inlet 90°F (32°C)
Ice Making
Water Drain
Condenser 90°F (32°C)
Water Inlet
Condenser
Water Drain
Bin Drain
Large
Capacity Bin
Drain
WATER-COOLED CONDENSER WATER
PRESSURE
Water pressure at the condenser cannot
exceed 150 psig (1034 kPa) with the
standard water-regulating valve. Contact
your distributor if your water pressure is
greater than 150 psig (1034 kPa). A special
order condenser/water-regulating valve is
available that allows water pressure up to
350 psig (2413 kPa).
Part Number: 000014142 Rev 02 5/17
Water Pressure Ice Machine Fitting
20 psi (140 kPa)
Min. Min.
80 psi (552 kPa)
Max. Max.
– –
Standard
20 psi (140 kPa)
Min.
150 psi (1034
kPa) Max.
High Pressure
Max.
Option
20 psi (140 kPa)
Min.
350 psi (2410
kPa) Max.
– –
– –
– –
3/8" (.95 cm) Female
Pipe Thread
1/2" (1.27 cm) Female
Pipe Thread
3/8" Female Pipe Thread
1/2" (1.27 cm) Female
Pipe Thread
3/4" (1.91 cm) Female
Pipe Thread
1" (2.54 cm) Male
Pipe Thread


Important
The Commonwealth of Massachusetts
requires that all water-cooled models
must be connected only to a closed loop,
cooling tower system.
Installation
Tubing Size Up to Ice
Machine Fitting
3/8" (.95 cm) min.
inside diameter
1/2" (1.27 cm) min.
inside diameter
1/2" (1.27 cm) min.
inside diameter
3/4" (1.91 cm) min.
inside diameter
1" (2.54 cm) min.
inside diameter
17