Aqua Medic Qube 30 Manual De Instrucciones página 5

2. Installation
Attach the Qube to the aquarium pane by using the holder. Don't twist the holder otherwise the cable within the
gooseneck could be damaged.
Attention: Please keep the light buttons clean and dry; also make sure your hands are dry before touching the
light, or the touch keys could fail.
On/Off Button
Touch the On/Off button to turn on the light. After touching the On/Off button again, the Qube switches off.
When you turn the light on, it should illuminate at once. If not, please touch (W) or (B) button to ensure that
both channels are turned on.
B and W Buttons
Please touch the (W) or (B) button to turn on both channels. The brightness changes by touching the buttons
repeatedly. The brightness cycles are: 1-2-3-4-5-0.
3. Maintenance and Care
1. Please protect the light from humidity, splash and condensate.
2. The fan inlet and outlet should be cleaned monthly, remove dust and any salt residues.
3. Please check monthly that the power supply is dry and the power plug is inserted tightly.
4. Clean the surface of the Qube monthly with a dry cloth to remove dust, salt or lime residues.
5. Remove monthly any salt or lime residues from the holder to prevent corrosion.
6. We recommend to clean the built-in fan regularly from dust deposits by blowing.
If the fan inlet and outlet of the light are covered in dirt, then the heat protection system will turn the light to
enter a protective state. When the temperature has dropped below 40 °C, the control system automatically
unlocks the light and it can be operated as usual.
4. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 06/2019
5