Polaris 9300 Sport Manual Del Usuario página 6

Page 6
2. Position the bottom power cable hook as shown
in Figure 3. Place the cable hook plate opposite
the power cable hook. Secure using a screw and
tightening with the Torx
3
Figure 3. Position the Bottom Power Cable Hook
4
Figure 4. Secure the Bottom Power Cable Hook
3. Secure the cable hook plate using two (2) bolts and
two (2) nuts and tighten with Torx wrench. Refer
to Figure 5.
5
Figure 5. Secure the Cable Hook Plate
wrench. Refer to Figure 4.
®
2
4. Position the power cable hook and control unit
hook on the upper tubes as shown in Figure 6.
Make sure the upper tubes (handles) are in the
proper orientation.
Figure 6. Position the Bottom Power Cable Hook
5. Secure the power cable hook and control unit hook
around the tubes using a screw and hand tighten
with the Torx wrench (supplied with unit). Refer to
Figure 7.
Figure 7. Install the Power Cable Hook and
Control Unit Hook
6. Secure the control unit hook using two (2) bolts
and two (2) nuts and tighten with Torx wrench.
Refer to Figure 8.
Figure 8. Secure the Hooks
8
9