VII PROBLEMS THAT YOU CAN ENCOUNTER :
OBSERVATIONS
- Low flow rate at the level
of circulation outlets
- High Manometer pressure
- Low Manometer pressure
GUARANTY
The blowed sand filters are guarantied from the delivery date for 5 years for all material or manufacturing faults.
Wear items (laterals, ring) are not guarantied. You must repect the installation and / or maintenance guides if
you want the guaranty to be valid. The interventions while the guaranty is valid do not extend its duration. The
invoice will be required each time the guaranty is used. The only obligation for the seller will be to replace or to
repair for free the product or the item considered as faulty. All the other costs will have to be paid by the buyer.
To benefit from this guaranty, all the products must be inspected at first by the seller's after-sales department.
His agreement will be necessary for any replacement. The guaranty does not work in case of an apparent defect.
The following cases are also excluded from the guarantee : the faults and damagings provoked by normal wear,
the damagings resulting from a non conform setting and / or a use and the product modifications done without
the seller's consent.
Legal guaranty : If the buyer has a latent defect, the seller must legally repair all the consequences
(article 1641 and the followings of the Civil Code). If the buyer wants to deal with tribunals, he
must do it quickly from the discovery of the latent defect (article 1648 of the Civil Code).
287 avenue de la Massane - 13210 Saint Rémy de Provence
NOTXEO - ind E - 0117
CAUSES
A pressure checking is necessary to know the causes
- Sealed .................................................................................................................... Clean the filter
- Valve closed on the outlet ................................................................................ Open the valve
- Strainer skimmer of the pump obstructed...................................................................... Clean
- Obstructed skimmer basket ............................................................................................... Clean
- Obstructed impeller pump .................................................................................................. Clean
- Pool water level too low ............................................................................. Re-adjust the level
- Valve closed on the aspiration ......................................................................... Open the valve
- Drained pump ........................................................................ Put some water in the pre-filter
- Air plug on the aspiration................... Check the hydraulic connections waterproofness
AQUALUX
FRANCE
www.aqualux.com
SOLUTIONS
Page 8/14