Volume Control; Checking Battery Status; Operating Your Radio - Fm - Festool SYSROCK BR 10 Manual De Instrucciones

5.3 Switch on/off

To switch on: Press the power but-
ton [1-5].
The radio is ready for operation.

To switch off: Press and hold the
power button [1-5] for a second.
5.4

Volume control

Press the volume control [a]
and [k] to adjust the desired
volume.

For a better sound quality using
an external device, adjust the
volume on the external device
to maximum 70%.
5.5

Checking battery status

To check the current battery level,
press the power button [1-5] to
switch on the radio. The battery sta-
tus indicator [e] will show the current
battery level (only with Li-Ion battery
pack).
Battery is fully charged
Battery is partially
charged
Battery low - charging
required
battery critical - alterna-
tive power source
required immediately.
5.6

Operating your radio - FM


Straighten up the antenna [1-3].

Press the source but-
ton [j] until the FM mode
is selected.
FM auto-tune

Press and hold (~1 sec.) the Tuning
control [i], [h] to carry out an auto-
tune.
Your radio will stop scanning when it
finds a station of sufficient strength.
The display will show the frequency
of the signal found. If the signal is
strong enough and there is RDS data
present, the radio may display the
station name, radio text and clock
time.
Finding other stations

Press the Tuning control [i], [h] as
before.
When the end of the waveband is
reached, your radio will restart tun-
ing from the opposite end of the
waveband.

If you find that FM reception is
poor, try repositioning the an-
tenna.
Manual tuning -FM

Press the Tuning control [i], [h] to
tune to a station.
9