Alecto BDM-150 Manual De Instrucciones página 31

Key rules for accurate measurement:
• Always take readings at the same time of day, ideally in the
morning, under the same conditions.
• Do not measure within 30 minutes
after smoking, coffee or tea
consumption.
• While taking a measurement,
sit down, relax, keep still, do not
move or speak.
• Wait approximately 3 minutes
before repeating a measurement.
Take measurements:
At any time, to stop the pressurizing process, press button
the cuff will stop inflating and air will exhaust from the unit.
1. Press button
the display stops flashing.
2. Use button
be stored in memory 1 (
3. Press button START to activate the measurements
- the cuff will inflate automatically (a 'P' on the display)
- when the required pressure is reached, the cuff will deflate
and the bloodpressure is measured
- after detecting the systolic, the diastolic and the pulse, the
measured values will be displayed on the LCD and will be
stored in the selected memory (
4. Press button
The measuring results are automatically stored in memory,
including the time and date of the concerning measurement.
1. Use button
2. By repeatedly pressing button
measurements will come on the display.
The memory-capacity is 60 measurements, 30 for memory
and 30 for memory
MEASURING
to switch-ON the BDM-150 and wait until
to select whether the measuring results will
) or in memory 2 (
to switch-OFF the BDM-150.
MEMORY
to select memory
.
or
or memory
, the results of previous
31
).
)
.
;