Operation and use / After use
• Tilt the holder with the hand mixer for-
ward into a horizontal position until you
hear it click into place.
• Connect the plug to the mains socket.
• By switching the mixer on using the
slide control, the bowl is rotated and the
holder with the hand mixer starts to
move.
• After the appliance is switched off, the
mixture which is on the side of the bowl
should be scraped off for a better mix-
ture.
18
How to look after the mixer set
maintenance information
After finishing:
• Switch off the appliance and disconnect
the plug from the main socket.
• Use the release key to remove the
attachments from the appliance and
leave in the bowl.
• Tilt the holder with the hand mixer back-
wards.
• Remove the bowl with the mixer attach-
ments and the mixed product.
• Keep the operating instructions during
the whole life of the appliance.
• Turn the locking button in an anti-clock-
wise direction until it clicks and remove
the hand mixer from the holder.
• There is a recess in the lower part of
the hand mixer as well as a holder for
wrapping the power cable around the
appliance casing
If the hand mixer or stand casing is soi-
led after use, it can be cleaned.
Before cleaning, disconnect the plug
from the mains socket.
The appliance may not be submerged
in water or washed under running
water.