Maintenance And Cleaning; Inspection; Cleaning - Oregon BL300 Manual De Instrucciones

OREGON® Cordless Tool System
BLOWER MODEL BL300

MAINTENANCE AND CLEANING

BLOWER
WARNING: A BATTERY OPERATED
TOOL WITH THE BATTERY PACK
INSERTED CAN START ACCIDENTALLY.
REMOVE THE BATTERY PACK
BEFORE INSPECTING, CLEANING OR
PERFORMING MAINTENANCE.
CAUTION: INSPECT THE BLOWER
REGULARLY. REGULAR INSPECTION
IS THE FIRST STEP TO PROPER
MAINTENANCE. FOLLOW THE
GUIDELINES BELOW TO MAXIMISE
SAFETY AND SATISFACTION. HAVE
ANY DAMAGED OR EXCESSIVELY
WORN PARTS REPLACED
IMMEDIATELY.
CAUTION: WHEN CLEANING THE
BLOWER, DO NOT IMMERSE IN WATER
OR OTHER LIQUIDS. DO NOT USE A
PRESSURE WASHER TO CLEAN THE
BLOWER.

INSPECTION

Before each use, and if the blower has
been dropped, inspect these parts:
• Handle: The handle should not have
cracks or other damage . It should be
clean, dry and free of oil, moisture or
anything else that prevents a firm grip .
• Electronics Cooling Vent: The electronics
cooling vent should be clear and free of
debris .
• Battery Pack: The battery pack should
be clean, dry and show no signs of
puncture, impact or other damage . The
contacts should be clean, dry and free
of debris .
• Battery Port: The battery port and
contacts should be clean, dry and free
of debris .
AA 1214 - F/N 571703
MAINTENANCE AND CLEANING
• Variable Trigger: The variable trigger
should operate smoothly and should
cause increased blower speed with
increased pressure .
• Trigger Lock-out: The variable trigger
should prevent the motor starting if it is
not depressed .
• Intake Screen: The intake screen should
be free of cracks or other damage and
should adequately cover the air intake
so as to prevent debris from entering
the intake .
• Blower Tube: The blower tube should
be free of cracks or other damage and
should fit snugly to the nozzle .
• Nozzle: The nozzle should be free of
cracks or other damage and should fit
snugly to the blower tube .
• Harness: Fabric should not be cut or
frayed, and adjustment buckle and clips
should be free from cracks .
• Screws: Screws should be tight and hold
each component in place .

CLEANING

CAUTION: WHEN CLEANING THE
BLOWER, DO NOT IMMERSE IN WATER
OR OTHER LIQUIDS. DO NOT USE A
PRESSURE WASHER TO CLEAN THE
BLOWER.
• Remove the battery .
• Remove any debris from the intake
screen to ensure unrestricted airflow .
• Clear debris from the nozzle .
• Clear any debris from the battery port
and wipe the contacts .
• Wipe dust and clippings from the
blower .
23