Belkin F8T031 Manual Del Usuario página 8

P74376ea_F8T031_man.qxd 11-11-2003 11:29
HARDWARE INSTALLATION
4. Double-click on the "Virtual Printer" icon.
5. A connection via Serial Port Profile over
the virtual COM port will be created. This
is usually "COM3" or "COM4" but can be
configured to another port. Make note of
the COM port for your specific application.
6. Go to Control Panel in Windows and open
the "Printers" folder.
10
Page 10
HARDWARE INSTALLATION
7. Right-click on the printer you pre-installed and choose "Properties".
8. Select the "Ports" tab.
9. Under the "Ports" section, select the printer
for the virtual COM port created in step 5.
You are now ready to print via Bluetooth
technology to your USB printer.
Note: Each time you would like to print via the
printer connected to the Adapter, you will have
to double-click on the "Virtual [USB Printer]"
icon first to make a connection, unless you set
the printer you created above to be your
default printer. In that case, the PC stack will
automatically send the print job via virtual
COM port.
11