Publicidad
Idiomas disponibles
Idiomas disponibles
B.
Table installation
CABLE
ON/OFF
Connect the central unit with the cable (5V, 1A) then mount the leg sup-
port on it and put the switch on ON position. The central unit is ready for
operation.
4. General pictograms
To return to the main screen.
To return to the previous screen.
The buttons with a red point need a long press (min 5s).
5. Main screen
2
12
6
9
8
1.
Date.
2.
Rf commincation (Appear when there are a RF communication
send/receive)
3.
Home/away management function
4.
Holyday function. Appear if holiday function is enabled
5.
Screen lock. A long press toggles between locking and unlocking.
6.
Flame status. The flame follows the heating demand in the system,
BLACK when there is no demand in the system and RED when
there is a demand in the system
7.
Display the time or the ambient T° of the room or zone. Make your
choice by pressing on the central part of the screen
8.
Room's access (active even if the Central is locked to see but not to
change settings).
9.
Error flag for the system (RF, limits, alarms, battery anomalies...).
Access to the list by pressing on this icon.
Cod. 1910000000259 - nv00
1
5
3
4
7
10
10. Displayed if the device is working on battery
11. Main menu
12. Outdoor temperature (available if an outdoor temperature sensor is
paired to the central unit)
6. Hour setting
For setting follow procedure as below:
Press
Set the hour and the date. Then press on
7. House creation
For setting follow procedure as below:
→
Press
8. Create all the rooms
1
1.
Scroll over rooms.
2.
Current room name.
3.
To delete a room.
4.
To create or add a room.
5.
To change current room name.
11
9. Main menu
For setting follow procedure as below:
Press
to go to main menu
1
5
1.
Consumption statistics menu.
- 13 -
→
then
or
→
long press on
2
3
4
1
2
3
6
7
Versione software
English
House creation
5
4
8
Publicidad
