Preliminary Operations - Roadstar HIF-6970BT Manual De Instrucciones

37. EJECT/ENTER: In CD mode, eject and close the CD Tray.
38. RANDOM: Select to a random playback.
39. TUN+: in the FM mode, adjust the frequency.
40. SCAN: Act as " scan" in the menu.
41. FOLDER: In USB and MP3 disc mode, press to select folder.
42. PREVIOUS BUTTON: skip backward.
43. STOP BUTTON: Stop the playback.
44. VOLUME- BUTTON: Adjust the volume level.
45. TREBLE+: Act as "up" treble.
46. BASS+: Act as "up" bass.
47. BASS-: Act as "down" bass.
48. TREBLE-: Act as "down" treble.

PRELIMINARY OPERATIONS

Connect the speaker wire to the speaker terminal (24) located on the back of unit.
Before connecting power to your audio system, the protective packing should be removed
from the CD compartment.
1. Press FUNCTION BUTTON (4) to select "FM" function.
2. Press EJECT/ENTER BUTTON (18) to open the cd door.
3. Remove the protecting packing from the CD compartment.
FM antenna: Unwrap the FM antenna and extend it fully. You may need to adjust the posi-
tion of the antenna to get optimum reception.

Press POWER BUTTON (1) to turn the unit ON.
 Press and hold POWER BUTTON (1) for 3 seconds to turn the unit OFF.
NOTE: When no sound is produced, the unit will switch OFF automatically after 15
minutes. Unplug the AC plug from the wall outlet if it will not be used for long periods of
time.
ADJUSTING THE VOLUME

Turn the VOLUME KNOB (8) to the desired volume level.

Audio Balance: Turn BALANCE KNOB (5) to adjust the volume between the left spea-
ker and the right speaker. The volume of the left speaker and right speaker is equal
when the LED display shows "00".
 Treble and bass: Turn BASS KNOB (11) and TREBLE KNOB (14) to switch between
treble and bass from "-3" to "3"
English 3 4 English
LISTENING TO THE RADIO
Press FUNCTION BUTTON (4) to select "FM" function. "OP" will be shown on the display.
Select a station using one of the following methods:

Long pressing TUNING DOWN/UP BUTTON (15)/(16) for 2 seconds or more, the fre-
quency changes down or up automatically until a station is found.

Repeatedly press TUNING DOWN/UP BUTTON (15)/(16) to change the frequency
until you find the station you want.
Program radio stations
You can program a maximum of 20 preset radio stations (FM).
1. Press SCAN BUTTON (13) for 2 seconds or more to activate automatic program mo-
de.
2. All available stations are programmed.
3. The first programmed radio station is broadcast automatically.
4. Press PREVIOUS/NEXT BUTTON (9)/(12) to navigate through the stored presets.
NOTE: If you press and hold SCAN BUTTON (13), it will delete all of the previous
presets you have stored and automatically reprogram all presets.
CD MODE
1. Press FUNCTION BUTTON (4) to select "FM" function. "OP" will be shown on the
display.
2. Press EJECT/ENTER BUTTON (18) to open the cd door.
3. Place a cd with the printed side facing up inside the tray, then close the cd door.
4. The first track will start playback.
5. Press PREVIOUS/NEXT BUTTON (9)/(12) to select your favorite tunes.
6. Press PLAY/PAUSE BUTTON (10). The disc will pause and pause indicator appears
on the display.
7. Press PLAY/PAUSE BUTTON (10) again to resume the playback.
Playing Repeatedly
During play, repeatedly press the REPEAT button on the remote control to select:

Repeat1: The current track is played repeatedly.

RepeatAll: All tracks are played repeatedly.

To return to normal play.
Program play
You can program up to 20 tracks to play in any desired order.
1. Insert a disc and press STOP BUTTON (7) when it starts playing.
2. Long pressing PROGRAM BUTTON (28) on the remote control for 2 seconds or mo-