IKEA FREKVENS Manual De Uso página 4

ENGLISH
TABLE OF CONTENTS
1. Power On/Off/Pair
2. Volume Control
3. Audio IN
4. Micro USB IN
5. Belt clip
Getting Started:
1. A long press on the button (1) turns the
speaker on/off. White LED is now on. If
a paired device is found, the LED shines
without blinking and your speaker is ready
to use.
2. If no device is found the speaker LED
continues to blink and enters pairing mode
automatically. Go to the Bluetooth settings in
your mobile device and connect to FREKVENS
6x10. The LED should now stop blinking and
your speaker is ready to use.
If no music has been playing for 20min, the
speaker will enter sleep mode.
Adjust Volume
Turn the knob (2) left to decrease or turn it
right to increase volume level.
Pair Bluetooth device(s)
(maximum 8 devices can be stored)
1. Make sure no other device is paired and in
range to the speaker.
2. Go to your Bluetooth menu on your mobile
device and connect to FREKVENS 6x10.
3. Once Bluetooth connection is established, the
white LED stops blinking.
Unpair Bluetooth device
Go to your Bluetooth menu on your mobile
device and unpair FREKVENS 6x10 from your
devices.
Using an external source
Connect the external source to the AUDIO
IN (3) jack on the rear panel.The speaker
automatically detects the external input and
4