Figure 13
RC-20 remote Zone 2
switch settings
Setting Up Your Lifestyle
Setting up the RC-20 remote for Zone 2
If your system uses a Model 20 music center, you need to set up a second RC-20 remote
control to operate the ZONE 2 outputs.
1. Remove the remote control battery cover and locate the miniature switches (Figure 13).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first
remote.
3. Slide switch 5 down (off), and switches 6 and 8 up (on).
Note: Refer to your Lifestyle
system in more than one room.
®
system owner's guide for more information on operating your
®
Stereo Amplifier
17