Setting up remote controls for other rooms
Figure 19
Microswitch settings for
RC-18S and RC-38S
remotes
To set up the RC-18S or RC-38S remote:
1. Remove the remote control battery cover and locate the microswitches (Figure 19).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match the house code
settings in your main room remote.
3. This remote is shipped from the factory set for room B. If this remote is used beyond a
second room, set switches 6, 7, 8, and 9 to the same room code as set in the Lifestyle
stereo amplifier.
Note: Refer to your Lifestyle
system in more than one room.
ON
RC-18S or RC-38S
remote
To set up the Personal
Refer to the owner's guide included with the Personal
configuring this remote for other rooms.
Setting Up Additional Rooms For Sound
®
system owner's guide for more information on operating your
®
music center II:
Room
®
music center II for instructions on
®
Room
23