Putting The Instrument Into Operation; Explanation Of The Front Panel - Rohde & Schwarz DOCSIS 3.0 Guía De Inicio

R&S SFD

1 Putting the Instrument into Operation

1.1 Explanation of the Front Panel

This section provides an overview of the connectors and LEDs on the front panel.
Figure 1-1 SFD Front Panel
Data SFP+ LED
Indicates a link has been established over the SFP+ interface.
Data SFP+ Connector
An SFP+ connector is provided for the user to insert an SFP+ module to stream data
to the DOCSIS 3.0 or DOCSIS 3.1 carrier.
Status LED
Provides an indication of the instrument status.
External Reference Status LED
Provides an indication of the external 10 MHz / 10.24 MHz frequency reference status.
Getting Started 2118.7546.02 - 02
Putting the Instrument into Operation
Explanation of the Front Panel
3