Remote Sensor (Optional Parts); Ir Receiver Unit (Optional Parts) - Fujitsu Airstage ARXC72GATH Manual De Instalación

Ocultar thumbs Ver también para Airstage ARXC72GATH:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
1

6.7. Remote sensor (Optional parts)

• For the installation method, please refer to the INSTALLATION MANUAL of remote
sensor.
Connection methods
• Connection terminals
Controller PCB
• Wiring arrangement
Controller PCB
• Remove the existing connector and replace it with the remote sensor connector (ensure
that the correct connector is used).
• The original connector should be insulated to ensure that it does not come into contact
with other electrical circuitry.
• Use conduit hole when external output cable is used.
Setting for room temperature correction
When a remote sensor is connected, set the function setting of indoor unit as indicated
below.
• Function Number "30":
Set the Setting Number to "00". (Default)
• Function Number "31":
Set the Setting Number to "02".
* Refer to "7.4. Function setting" for details about Function
Number and Setting Number.
9365748145-01_IM.indb Sec1:12
9365748145-01_IM.indb Sec1:12
Remote sensor
terminal (CN8)
Cable tie
(Field supply)
] 1

6.8. IR receiver unit (Optional parts)

• For the installation method, please refer to the INSTALLATION MANUAL of IR receiver
unit.
Connection methods
• Connection terminals
Controller PCB
• Wiring arrangement
Core
Clamps
IR receiver
unit terminal
(CN18)
Controller PCB
Cable tie
(Field supply)
En-12
7/12/2012 11:09:15 AM
7/12/2012 11:09:15 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Airstage arxc90gath

Tabla de contenido