Starting To Sew - Sears Kenmore 385.19233 Manual De Instrucciones

(_)Mark forplacement ofbuttonhole
Starting point
(_ Slider
(_ Thereshouldbenogap.
Spring holder
Difference
Raise thefoot.Insertneedle thread through slotinfoot.
Drawboththreads to leftunder thefoot.Insert t hefabric
under thefoot,andlower theneedle intothefabricatthe
buttonhole s tarting point. L ower t hebuttonhole f oot.
If thereisa gap_, it maycause anuneven buttonhole
stitchlength as shown _.
f
%
®
• Starting to sew
After sewing the buttonhole stitch, the machine stops
automatically.
The machine will auitomatically sew first the front
bartack and left row, then the right row, and lastly the
back bartack and locking stitch.
After sewing the buttonhole, the machine automatically
stops. Raise the presser foot to move fabric to the next
buttonhole position.
Press the foot control to sew anther buttonhole.
f
SEN
L
STEP I
Isl/" STEP2
1 ....
SEN
n STEP 3
Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks. Cut
the opening with the buttonhole opener.
f-
J
When finished, push the buttonhole lever up as far as it
will go.
%
J
62