Control Elements; General Safety Instructions; Safety Instructions For All Operations - Festool RENOFIX RG 130 E Manual De Instrucciones Original

Reinstating grinder RG 130 E –
Original instruction
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip

2 Technical data
Nominal voltage
Mains frequency
Power input
Adjustable rpm
Tool
Weight
Protection class
3 Prescribed usage
The machine is designed for straightening con-
crete surfaces, smooth transfers on boarding,
removing plaster, paint, glue residues, coating,
corrosion, and for cleaning concrete and wooden
surfaces.
The machine is constructed for use with special
wheels recommended by the manufacturer and
they must not be used with a wheel made from
connected ABRASIV material.
The machine can only be used for dry grinding
using an effi cient suction device.
Noncompliant use of the machine is a sole re-
sponsibility of the user.
GB
220-240 V ~
50 / 60 Hz
1600 W
3000 – 7700 min
130 mm
3.8 kg
II /
4

Control Elements

[1-1] Switch
[1-2] Arresting lever
[1-3] Suction extension
[1-4] Revolutions regulation wheel
[1-5] Front handle
[1-6] Spindle arresting button
[1-7]
Brush tilting segment
[1-8]
Brush
[1-9]
Handle manual screw
[2-1]
Flange
[2-2]
Grinding wheel
[2-3]
Clamping nut
[2-4]
Key
[2-5]
Spindle
[3-1]
Brush tilting segment
[4-1]
Brush
[4-2]
Screws with washers
[4-3]
Cover
[4-4]
Springs
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
5 Notes on Safety Prevention
5.1

General Safety Instructions

WARNING!
instructions, illustrations and specifi ca-
tions provided with this power tool. Failure
to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
–1
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2

Safety instructions for all operations

Safety Warnings Common for level grinding:
a) This power tool is intended to function as a
level grinder. Read all safety warnings, in-
structions, illustrations and specifi cations
provided with this power tool. Failure to fol-
low all instructions listed below may result in
electric shock, fi re and/or serious injury.
b) Operations such as cutting is not recommend-
ed to be performed with this power tool. Op-
erations for which the power tool was not de-
signed may create a hazard and cause personal
injury.
c) Do not use accessories which are not specifi -
cally designed and recommended by the tool
manufacturer. Just because the accessory can
Read all safety warnings,
11