Safety Instructions; Use; Description; Scope Of Delivery - SATA dry jet 2 Instrucciones De Servicio

Operating instructions SATA dry jet 2
EN
■ personal protection gear not be-
ing used.
■ original accessory and spare
parts not being used.
■ unauthorised modifications or
technical changes.
■ natural wear and tear.
■ abnormal impact.
■ impermissible assembly and
disassembly work.

2. Safety Instructions

Read and comply with all direc-
tions listed in the following. Non-
compliance or incorrect compliance
can lead to malfunctions or severe
injuries and even death.
2.1. Requirements regarding
personnel
The dry jet gun may only be used
by experienced skilled workers and
instructed persons who have thor-
oughly read and understood these
operating instructions. Do not use
the dry jet gun when tired or under
the influence of drugs, alcohol or
medication.

3. Use

Intended Use
The dry jet gun is used for forced
curing of waterborne paints. Small-
er surfaces such as doors or wings
can be dried with a single hand-
operated dry jet gun. The stand ver-
sion with several dry jet guns can
be used for larger surfaces.
Incorrect use
Incorrect use refers to using the
54
dry jet gun to cure solvent-borne
materials.

4. Description

The dry jet gun is connected to the
compressed air circuit by a con-
nection nipple. The sucked in air is
cleaned by a sieve. The integrated
air flow control and the rotating flat
fan nozzle point the air directly onto
the sprayed surface. The dry jet
gun consists of the main parts:
■ Filter holder [1-1] with sieve [1-2]
■ Handle [1-4] with air flow control
[1-3]
■ Flat fan nozzle [1-6]

5. Scope of Delivery

Notice!
The connection nipple is only
included in the standard version.
For all other versions, the con-
nection nipple has to be supplied
by the customer. The SATA con-
nection nipple (Art. No. 6981) is
necessary for connecting the dry
jet gun to a SATA dry jet 2 stand
or SATA dry jet 2 stand jumbo.
■ Dry jet gun SATA dry jet 2
■ Sieve (set of 3)
■ Flat fan nozzle
■ Connection nipple (for standard
version)

6. Technical Design

[1-1] Filter holder
[1-2] Sieve (not visible)
[1-3]
Air flow control
[1-4]
Handle