Technical Data; First Use - SATA dry jet 2 Instrucciones De Servicio

[1-5] Connection nipple
[1-6] Flat fan nozzle (rotating)
[1-7] Nozzle

7. Technical Data

Description
Optimum operat-
ing overpressure
Max. operating
pressure
Max. operating
temperature
Storage tempera-
ture
Air consumption

8. First Use

The dry jet gun must be fitted be-
fore being used for the first time.
Check after unpacking:
■ Dry jet gun damaged.
■ Scope of supply complete (see
chapter 5).
8.1. Mount flat fan nozzle
To align the blowing air, the flat
fan nozzle has to be mounted and
aligned.
■ Push the flat fan nozzle [2-6]
onto the front nozzle [2-7] of the
dry jet gun until locks in place.
Unit
2.5 bar
10.0 bar
60 °C
-20 °C – 80 °C
270 Nl/min at
2.5 bar
Operating instructions SATA dry jet 2
8.2. Mount connection nipple
Notice!
The connection nipple is only
included in the standard version.
For all other versions, the con-
nection nipple has to be supplied
by the customer. The SATA con-
nection nipple (Art. No. 6981) is
necessary for connecting the dry
jet gun to a SATA dry jet 2 stand
or SATA dry jet 2 stand jumbo.
■ Screw connection nipple
[2-5] onto the air connection
of the dry jet gun [2-4] (torque:
1 Nm).
8.3. Mount sieve
Notice!
The sieve is not suitable for clean-
ing and must be replaced when
clogged (see chapter 10).
The sieve is symmetrical in de-
sign. It can be fitted in any direc-
tion.
■ Press a sieve [2-1] into the filter
holder [2-2] until it locks in place.
EN
55