Rexel ClassicCut CL200 Manual De Instrucciones página 4

Specifications
Models
Product Code
Sheet Capacity 80g/m
2
Cutting Length
Integrated Paper Guide
Size Guide
Diagonal Lines
Laserlight Power Source
Laserlight Power Class 2
m CAUTION: Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure
m NOTE: Please retain this information regarding
safe operation of this paper guillotine
m CAUTION: Guillotine should be operated by an
adult or under adult supervision
m CAUTION: Sharp blade, do not touch the edge of
the blade
m
CAUTION: Always secure the safety guard to the
handle using the retaining bracket
(CL200)/ screw (CL410/CL420)
1 Guillotine base with calibrated grid
2 Metric and Imperial scale guide
3 Transparent safetyguard
4 Cutting arm / Handle
5 Cutting arm safety latch
6 Laser light aperture (CL410/CL420)
L
Safety Guard
m
CAUTION: Sharp Blade. Lock blade arm down
with safety latch before installing
handle
4
Rexel ClassicCut™ CL200 Rexel ClassicCut™ CL410
2101972 2101973
15 25
310mm 390mm
A7, A6, A5 & A4 A7, A6, A5 & A4
Centimetres and Inches Centimetres and Inches
15, 30, 45 & 60 15, 30, 45 & 60
n/a 2xAAA - 1.5v batteries included
n/a <1mW 650nM
m
m
m
m
m
m
7 Laser light button (CL410/CL420)
8 Carry Handle
9 Heavy Duty Paper Clamp (CL420)
J Back Stop
K Safety guard/handle retainer
1
2
Rexel ClassicCut™ CL420
2101974
25
467mm
A7, A6, A5, A4 & A3
Centimetres and Inches
15, 30, 45 & 60
2xAAA - 1.5v batteries included
<1mW 650nM
CAUTION: Do not lubricate the blade
CAUTION: Always latch the blade/handle in the
down, closed position when not in use
CAUTION: Do not carry the guillotine by holding
the cutting blade or the cutting arm
CAUTION: Always operate the guillotine with the
safety guard in place
CAUTION: Laser Radiation - do not stare into the
beam - Class 2 Laser Product
CAUTION: Before use ensure raised handle blade
does not fall when handle is released.
Do not attempt to adjust any parts.
M
A. Position the safety guard according to illustrations
and fix with screws using a screwdriver ensuring the
edge slot of the safety guard located with the retaining
bracket (CL200)/ screw (CL410/CL420).
Safety guard should now be locked in place and is ready
for you to start.